No products in the cart.
6.0L Powerstroke Diesel Forged Rod Stage 3 Long Block Engine
$15,900.00 $14,900.00
Description
Our Stage 3 6.0 long block is the best in the industry, we include much more for your money than all of our competitors (see description below), our machining process dose not very, all our engines receive the same quality machining process all done in house. Over 60+ years combined of engine machining and engine building experience sets us apart from other re manufacturers. Our 6.0 Power Stroke Stage 3 long blocks are built to last, with over 1000+ sold, we continue to push the envelope on quality. Every engine we build is tested and created in a steel shipping crate to insure you receive a 100% working quality product.
Engine Description:
6.0 L Stage 3 Long block is a great match for Hot Street, Drag Race & Sled Pull Applications. This long block will make 200+Hp & 340+ ft lbs over a factory engine. Incredible turbo spool for large single & compound turbo set ups. Rated for up to 1800 HP. Our Stage 3 Long Block is a good match for up to 700cc injector’s. This exact Engine package has set multiple records, dating back to 2014.
This is a killer set up for a Hot Street/ Drag Race / Sled Pull Application minimum of 2800-3000 RPM stall converter will be required. Typical proven 1000+HP set ups, S480 turbo, 330/150+ cc injectors, will make over a 1000HP with ease & still some what street-able with incredibly fast turbo spool.
Includes:
HD Mahle Piston set .010 .020 or .030 over
Ceramic coated & de-lipped (race fuel bowl)
Ceramic coated & de-lipped (race fuel bowl)
.075 fly cut valve reliefs = 16.5 compression ratio
DLC coated tool steel wrist pins
Clevite 77 P Bearings
HD Extreme Lifters
New lifter hold downs
OEM rocker arm assemblies
New billet Stage 2 push-rods
Oven Bake cylinder block
Shot peen and stress relieve cylinder block
Mag and pressure test block
Tap and clean all threaded holes in block
Cylinder Block
Clevite 77 P Bearings
HD Extreme Lifters
New lifter hold downs
OEM rocker arm assemblies
New billet Stage 2 push-rods
Oven Bake cylinder block
Shot peen and stress relieve cylinder block
Mag and pressure test block
Tap and clean all threaded holes in block
Cylinder Block
O-ringed Cylinder block deck
Cnc Bored .010, .020 or .030 over
Honed with Tq Plates
Cylinder block resurfaced
Line Hone Main tunnel (if needed)
Tap oil galley holes for thread in plugs
Tap oil galley holes for thread in plugs
Oil system modifications
Clean and prep block
Clean and prep block
DDPM tool steel oil pump gear set
Install new cam bearings
Install new piston oil cooler jets
New aftermarket thicker cylinder head castings
Install new cam bearings
Install new piston oil cooler jets
New aftermarket thicker cylinder head castings
Fully CNC Ported (220+CFM)
Port match customer supplied Intake manifold (includes custom intake gaskets)
Forged Stainless Nitro Black Intake Valves
Forged Stainless Nitro Black Intake Valves
Forged Inconel Nitro Black Exhaust Valves
120 lb High-Rev valve springs
New Oem locks retainers and bonded valve seals
Custom cut valve seats (combustion chambers)
120 lb High-Rev valve springs
New Oem locks retainers and bonded valve seals
Custom cut valve seats (combustion chambers)
Hone valve guides
Surface cylinder head to a very fine ra 4 Finnish
Precision polish std size Crankshaft
ARP Crank Flange Bolts
ARP Main Stud Kit
Balance crankshaft
Balance crankshaft
ARP 625 Head studs
Connecting Rods: Callies Ultra Forged Connecting Rod Set
Connecting Rods: Callies Ultra Forged Connecting Rod Set
Rocker boxes reconditioned
Stage 3 Billet Callies Enduro Core Camshaft
Stage 3 Billet Callies Enduro Core Camshaft
Tool Steel Cam retaining Plate
ATI Harmonic balancer
SFI Billet Steel Flex Plate
Complete Mahle Master Overhaul Gasket Set
Assembly and blue print of long block
Sim test long block
Sim test long block
Note: This engine is equipped with de-lipped fuel bowl pistons & could white fuel smoke upon cold start up’s.
Upgrades:
Aluminum Cylinder head set (double O-ringed)
Freight is included to locations with folk lift is available US 48 only
If lift gate is needed for residential delivery there will be $175.00 added to your final bill
Our Listed Price is Out the Door Pricing, No hidden Fees Shipping is included
No Core Charge No Core Return
Additional information
| Weight | 850.00 lbs |
|---|---|
| Dimensions | 48 × 48 × 43 in |
Products related to this item
-
7.3 Powerstroke Stage 2 Engine Overhaul Kit
$3,199.99$2,950.00 -
7.3 Powerstroke Stage 1 Engine Overhaul Kit
$2,675.00$2,499.99 -
7.3L POWERSTROKE MAIN BEARING SET
$148.99$135.50
About Us
Dynamic Diesel Performance & Machine Inc.
We are the trusted leading supplier of high performance diesel parts and engines in the United States Since 2010. Our shop has a large selection of Engines, Rebuild Kits, Engine Parts & Accessories. Fully Equipped State of the Art Machine Shop & 20+ Years of Engine Machining & Building Experience.
