Description

6.0L Ford Powerstroke Diesel Overhaul Kit Stage 2

The Stage 2 Master Overhaul Kit is meticulously engineered to enhance the performance of daily drivers and light towing applications, making it an ideal choice for those seeking significant power gains without compromising reliability. This comprehensive kit is designed to deliver an impressive increase of over 70+ horsepower and 150+ foot-pounds of torque compared to factory engine specifications, ensuring that your vehicle not only performs better but also responds more dynamically under various driving conditions. With the added benefit of faster turbo spool and reduced exhaust gas temperatures (EGTs), this kit optimizes engine efficiency and longevity. It is particularly compatible with single non-variable geometry turbo kits, allowing for straightforward installation and integration. While custom tuning is not a strict requirement for operation, it is highly recommended to fully realize the potential of this upgrade and achieve the best possible performance outcomes.

• 6.0L Ford Power Stroke Diesel 2003-2010
• 8-New Mahle/UEM .STD- .010-.020-.030-.040 bore sizing available
• Steel top ring groove, perfect for street strip trucks over the long haul
• Grafal moly based friction coating on skirts
• Plasma coated steel top ring, Ductile Iron second ring, 2 piece oil ring
• The Piston Go Thru a 4 Stage Coating Process Done In House
• Pistons Include:
• 8 Pistons
• Teflon Coated Skirts
• 8 Pins
• 16 Locks
• Mahle Piston Rings Are Included
• (Optional Cerakote thermal management piston top coating, far superior to dated ceramic coatings)
• When ordering please spec what size piston are needed
• BEARINGS: Cleveite rod & main bearings (STD-.020-.030)
• CAM BEARINGS: .STD size
• Optional Freeze Plug/Oil Galley Plug Kit 
• LIFTERS: 16-HD  lifter set
• CAMSHAFT Stage 2 custom grind cam 70+HP
• Completely redesigned cam profile to reduce cam and lifter failures, Smooth Lobe Ramp Rate Technology
• Camshaft Includes a Life Time Replacement Warranty
• Cam Spec’s 180/202 .380/.385 107 Lsa
• 100 lb High Rev Valves Springs (32)
• Billet .050 shorter Push-rods (16)
• FREE T-Shirt Included, please select your size before check out.

Gasket & Seals Set Includes: 4-oil pan, 1-oil filter, 1-misc o-ring, 1-timing cover, 1-oil pump inlet, 1-EGR valve, 1-oil manifold, 1-misc washer, 2-cylinder head,1-crank case cover, 4-cylinder head plug, 2- EGR cooler, 1-EGR valve, 16- fuel injection grommet, 8-fuel injection o-ring, 8- injection nozzle washer, 13- intake manifold, 3- oil cooler, 1-oil cooler o-ring, 1-thermostat, 2-throttle body, 3-turbo air fitting, 4-turbo oil drain, 4- valve cover, 20-valve cover grommet, 1-water outer, 2-exhaust manifold, 6-exhaust pipe, 1-crankshaft cover, 1-timing cover, 1-rear main seal, 2-valve covers, 32- valve steam seals.

These kits are not to be used in VT365 International Engines without custom tuning.

Proven Power Combinations:

• Stage 2 Master Overhaul Kit with ceramic coated pistons
• Stage 3 68 mm VGT Turbo
• 190/75 Injectors
• Thumper 1 High pressure oil pump
• Odawgs S3R Ported Intake
• Regulated Return Fuel system
• And other supporting mods
• We have made over 685 HP / 1400 Ft lbs  with custom tuning on our 2006 F-250 test truck.
• When running a non vgt Turbo we suggest a torque converter replacement with a higher stall of 400-500 rpm.

PLEASE READ:(Piston Agreement)

This product is designed for precision and performance, catering to those who require specific piston sizes for their engine blocks. It is essential to have your cylinders measured at a machine shop prior to ordering to ensure compatibility. Please be aware that any changes to your piston size after the order has been processed will incur restocking and shipping fees. Additionally, pistons featuring ceramic coatings or those that have been machined are non-exchangeable, emphasizing the importance of accurate measurements before purchase.