Description
Stage 3 Billet Cam Shaft Thumper Cam
Will fit any 2007-2010 6.4L International or Ford
Induction Heat treated Twice the Depth Of Factory Cam
Lower EGT’S
Increased HP / TQ
Suited For Street/Strip/Pulling
Must have .075 Milled Pocket Pistons to Clear Valves
But should also be checked if heads and block have been milled.
Spec’s:
197/214 DUR@ .50 474/414 LIFT 108 LSA
Racing Use Only
Upgraded Valve Springs and Push rods Are A MUST for best results this cam will rev to 5500+ Rpm.
2800+ rpm Stall Converter Is Required
This Cam Dose Not Include The Drive Gear You Will Have To Press Yours Off/On.