Description

6.0L Ford Powerstroke Diesel Overhaul Kit Stage 2

Our Stage 2 Master Overhaul Kit is a great match for Max Hp Daily Drivers and Light towing applications, This kit will increase. Up to 70+Hp & 150+ ft lbs over a factory engine, Faster turbo spool and lower egts!  Works great with single Non VGT turbo kits, custom tuning is not required but highly suggested.

• 6.0L Ford Power Stroke Diesel 2003-2010
• 8-New Mahle .STD- .010-.020-.030-.040 bore sizing available
• Steel top ring groove, perfect for street strip trucks over the long haul
• Grafal moly based friction coating on skirts
• Plasma coated steel top ring, Ductile Iron second ring, 2 piece oil ring
• The Piston Go Thru a 4 Stage Coating Process Done In House
• Pistons Include:
• 8 Pistons
• Teflon Coated Skirts
• 8 Pins
• 16 Locks
• Mahle Piston Rings Are Included
• (Optional Cerakote thermal management piston top coating, far superior to dated ceramic coatings)
• When ordering please spec what size piston are needed
• BEARINGS: Cleveite rod & main bearings (STD-.020-.030)
• CAM BEARINGS: .STD size
• LIFTERS: 16-HD  lifter set
• CAMSHAFT Stage 2 custom grind cam 70+HP
• Completely redesigned cam profile to reduce cam and lifter failures, Smooth Lobe Ramp Rate Technology
• Camshaft Includes a Life Time Replacement Warranty
• Cam Spec’s 180/202 .380/.385 107 Lsa
• 100 lb High Rev Valves Springs (32)
• Billet .050 shorter Push-rods (16)
• FREE T-Shirt Included, please select your size before check out.

Gasket & Seals Set Includes: 4-oil pan, 1-oil filter, 1-misc o-ring, 1-timing cover, 1-oil pump inlet, 1-EGR valve, 1-oil manifold, 1-misc washer, 2-cylinder head,1-crank case cover, 4-cylinder head plug, 2- EGR cooler, 1-EGR valve, 16- fuel injection grommet, 8-fuel injection o-ring, 8- injection nozzle washer, 13- intake manifold, 3- oil cooler, 1-oil cooler o-ring, 1-thermostat, 2-throttle body, 3-turbo air fitting, 4-turbo oil drain, 4- valve cover, 20-valve cover grommet, 1-water outer, 2-exhaust manifold, 6-exhaust pipe, 1-crankshaft cover, 1-timing cover, 1-rear main seal, 2-valve covers, 32- valve steam seals.

These kits are not to be used in VT365 International Engines without custom tuning.

Please spec sizing of pistons and bearings needed when ordering, Kits usually ship with in 5-7 business days depending on stock.

Proven Power Combinations:

• Stage 2 Master Overhaul Kit with ceramic coated pistons
• Stage 3 68 mm VGT Turbo
• 190/75 Injectors
• Thumper 1 High pressure oil pump
• Odawgs S3R Ported Intake
• Regulated Return Fuel system
• And other supporting mods
• We have made over 685 HP / 1400 Ft lbs  with custom tuning on our 2006 F-250 test truck.
• When running a non vgt Turbo we suggest a torque converter replacement with a higher stall of 400-500 rpm.

PLEASE READ:(Piston Agreement) Please take your engine block to the machine shop and have them measure your cylinders so you know what size pistons to order. If you change your piston size after your order has been completed and shipped you will be charged a restocking & shipping fee. Pistons with ceramic coating and/or machined pistons CAN NOT BE EXCHANGED!